Welcome to Wired4Signs USA!
Surface Mount Philips Hue Light Strip Channel - Model SLW15
Our SLW15 LED Extrusion provides a "dots free" diffusion for most LED Strips.
This LED channel is a favorite choice for those who have invested in the Phillips Hue LED LightStrip or lifx led strip as it comfortably houses the strip.
It also works very well with our Tridonic led strip w...
The Mikro10 - 1/4" LED Edge lit Acrylic Sign Base Channel
The Mikro10 - 1/4" LED Edge lit Acrylic Sign Base Channel can be used illuminate the edge or engraving on the glass panel surface
to be used for furniture (display cases) or advertising
fits the 6 mm or 1/4" thick glass or acrylic panel
note: the Edge lit Acrylic Sign Base ...
Surface Mount LED Strip Channel - Model SLW10
Super wide aluminum profile with a 36,6mm space for an extra-wide LED stripes or a triple row of standard 12mm LED stripes.
It is a low design with the aluminum body directly screwed to the surface by the ST 2,2x9,5mm self threat screws. Almost flat snap-on UV resistant diffuser is providing a qualit...
Slim Line 7mm is a surface mount high quality anodized aluminum LED profile (only 7mm high) which is dedicated for standard led stripes up to 12mm in the width. The profile is performing as the heat sink to the LEDs and appears as nice, stylish housing for the LED strip.
three different standard UV resistant, snap-in diffusers: frosted, 50% fros...
This is a small dimensions LED profile which is dedicated for standard 6mm/8mm LED stripes. ALU-SWISS profile is available with two high quality snap-in UV resistant diffusers: smooth and frosted "LEDs DOTS FREE".
We designed for ALU-SWISS a snap-in fixing base which assures an easy installation of the profile. Thanks to its small size, this pro...
Recessed LED Channel - Model RSL7 - 2 Meter (6.56ft) or 3 meter (9.80ft)
This Recessed LED Channel is a Slim Line 7mm high LED profile that is designed to be built-in into any kind of surface.
The wings of the Recessed LED Channel which are extending on both sides are covering completely the mill row.
This type of Recessed LED Channel may be u...
Very Thin Recessed LED Strip Channel - Model Nano Line [with Opal Cover]
The Very Thin Recessed LED Strip Channel - The Nano Line (6x14mm), is the smallest linear profile in our current offer.
As the diffuser for this Very Thin Recessed LED Strip, we use UV resistant silicone material to achieve diffused, soft, homogeneous, LEDs DOT's FREE 6mm(0...
Recessed LED channel - Model RSLW8
The RSLW8 Recessed LED channel designed to house LED Strip up to 3/4" (20mm) wide.
The RSLW8 Recessed LED channel is designed to be recessed into any kind of surface.
It may be used with any kind of LED strip available on the market, for instance: double row LED strips, RGB strips, digital RGB ribbons or water...
Our Alu-45 is a quality anodized 45 degree led channel. Alu-45 has been designed to fit any corner LED lighting application. The led corner profile is dedicated for standard LED strips up to 12 mm(1/2")wide. Large weight of aluminumprovides an excellent heat sink for the LEDs and keeps a modern and stylish look. Alu-45 is available in White as w...
Slim Line Wide 8mm, surface mount profile has been designed and made for LED stripes wider then standard. The width of the profile is 20mm, thanks to that it can accommodate any type of the led stripes available on the market: double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which do no...
The Alu-Flat LED Floor Lighting Channel
This quality, anodized, aluminum LED profile is only 7,6mm (0.3") high.
Alu-Flat may be installed on the floor, thanks to strong aluminum walls and a damage resistant diffuser
The profile has many different applications: for example may be installed under a shelf, a kitchen cabinet or on the floor.
Lighted Closet Rod LED Channel - Model:- Alu Round
This is a high-quality Lighted Closet Rod LED Channel IS round shaped anodized aluminum LED profile with a rounded diffuser. It was designed for high power LED lighting (up to 30W/m). Massive aluminum weight (0,6kg/m) provides an excellent thermal LED cooling and performs as a stylish and profes...
3,15" Linear Recessed LED Channel Strip - Model RPLW80FL
This RPLW80FL is a 3,15", Recessed LED Channel for recessed installation in plasterboard ceilings.
While maintaining the luminous surface, the light distribution was corrected and the luminosity of the lampshade was adjusted using optional reflectors made of high-polished aluminum.
1.24" Plaster-in LED Drywall Channel (2meter/6.56ft length)
1.24" Plaster-in LED Drywall Channel cut sheet
flush mount linear led 5/8 drywall or 1/2" drywall
Stock items are same day shipped to Knoxville ,Tennessee ,USA
See all the available accessories below
LED Drywall Channel suitable for 1/2" sheetrock
The Alu-Baseboard is a two-part Baseboard LED Lighting Profile. It consists of a baseboard profile and it is used along with the insertable Alu Swiss profile.
This enables the main LED baseboard profile to be installed into the wall and then a small Alu swiss profile, containing the light source, to be installed.
This also enables service after ...
RPL35 US - 1.38" Plaster-in Trimless Drywall LED Channel
The RPL35 US Plaster-in Trimless Drywall LED Channel is a narrow (1.38"), high-quality raw aluminum profile for plasterboard ceilings and walls.
The RPL35-US LED Drywall Channel is the smallest of our Flow Series Plaster-in Trimless Drywall LED Channel
This Trimless Drywall LED Channel is ...
The strong attribute of this stair profile is the light directed down on the stair and the soft light edge illuminated horizontal diffuser.
Indirect light delivers soothing, soft light directly on the stair where is needed. The diffuser placed and LED illuminated horizontally determinate the end step edge of the stair by looking from the top. Th...
Up and Down Ceiling Accent Lighting LED Profile for LED StripThis LED profile was designed to create a soft, indirect, upward ceiling wash as well as a thin downward glow around the perimeter of your room. The LED channel is sold by itself but comes has additional options such as the upward diffuser and downward diffuser choices, aluminum end ca...
Silver LED Stair Nosing Channel - Model:- Alu-Stair Nano
This is the smallest dimension, walk over safe, aluminum, LED Stair Nosing profile that we have. The high-density aluminum-alloy body is suitable for handling the stress of everyday walk over traffic.
The special hard aluminum alloy in connection with deep anodizing surface increases the ...
180 Deg Square Neon LED Strip Diffuser Channel-the Alu Square
This aluminum profile is designed to mount 3 sided LED Strip Diffuser featuring side-emitting, snap-on, round or square-shaped diffusers.The LED channel has an opal milky led strip diffuser and is therefore completely LED DOT FREE for led 60 led per meter strip and anything more dense...
Model Alu-Stair 2 Carpet:- LED Strip Lights For Stairs Channel ALU-STAIR 2 carpet Theater Step Lighting Channel is designed to house LED Strip Lights For Stairs for carpet finish stairs with a thickness of 4-10mm.
This LED Strip Lights For Stairs Channel has two light sources, an illuminated tread diffuser option and a front diffuser angled down...
The MIKRO-LINE12 - 0.31" LED Edge lit Acrylic Sign Base Channel
The MIKRO-LINE12 - 0.31" LED Edge lit Acrylic Sign Base Channel can be used illuminate the edge or engraving on the glass panel surface
to be used for furniture (display cases) or advertising
fits the 8 mm or 0.31" thick glass or acrylic panel
note: the Edge lit Acryl...
RPL55 US LED Drywall Channel - Plaster-In Range - 3 meters (9.84 ft)
The RPL55 US LED Drywall channel is part of our new Flow Series Plaster-in Trimless Drywall LED Channel Line.
This LED Drywall Channel is made of high-quality raw aluminum with a diffuser span of 55mm (+2") gives you the opportunity to create functional and modern LED light...
Model ALU45-Wide - Large Corner LED Channel
The ALU45 WIDE profile is a high-quality 45 degree led channel.
Optimized interior design allows for even illumination of the lens over the entire width. To achieve this effect it is necessary to use 2 rows of LED strips with a maximum width of 8mm each. The specially designed shape allows for a wide a...