{"id":10540437197,"title":"Wireless DMX512 Decoder transceiver 2.4G LT 870","handle":"dmx-transmitter-870","description":"\u003cp\u003eThe LT- 870 Wireless transceiver can transmit and receive DMX signal. If you are transmitting to low voltage LED Strip or LED modules you can use the LT-870 together with the \u003cstrong\u003e\u003ca href=\"https:\/\/www.wired4signsusa.com\/products\/dmx-receiver-874?variant=41185278029\" target=\"_blank\" title=\"dmx wireless controller\" rel=\"noopener noreferrer\"\u003eLT-874 Wireless DMX Decoder\u003c\/a\u003e\u003c\/strong\u003e( see below)\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eBrief introduction\u003cbr\u003eLT-870 Wireless DMX512 transceiver transfers the standard DMX512 protocol data by wireless transmission. One send, one receive or multiple receive. (Supporting point to point, point to multi-point), a sending end can configure multiple receiving ends as long as the receiving end and sending end are set as same frequency point.\u003cbr\u003e\u003cbr\u003eThe product is used for DMX console and lamp. The wireless data transmission between lamps replaces cable transmission which relies on twisted-pair, etc., for a long time. No delay and data is real-time and reliable during data transmission process,\u003cbr\u003e\u003cbr\u003eThe product adopts 2.4GHZ RF global open ISM frequency channel, which is a low-cost, powerful wireless DMX512 transceiver and widely applied to DMX512 controllers from various manufacturers.\u003cbr\u003e\u003cbr\u003e64 channels choices, users can use 64 groups wireless network independently without interference in one place.\u003cbr\u003e\u003cbr\u003eUse relay Settings if need further increase the communication distance. \u003cbr\u003e \u003cbr\u003e\u003cbr\u003eNote: This product also can be applied to the RS485 bus equipment where wiring is not convenient to wireless transmit RS485 signal.\u003cbr\u003ePerformance Features\u003cbr\u003e Adopt 2.4GHZ RF global open ISM frequency channel, which is applicable for license free worldwide and efficient GFSK modulation. .\u003cbr\u003e Compatible with Standard International standard DMX512 protocol.\u003cbr\u003e A sending end can configure multiple receiving ends. As long as the receiving end and sending end are set as same frequency point, both sides can communicate normally.\u003cbr\u003e 64 channels choices, users can use 64 groups wireless network independently without interference in one place.\u003cbr\u003e 4 choices of sending end transmitted power level, visual communication distance can reach 350 meters at maximum transmitted power (20dBm),\u003cbr\u003e With self-test inspection mode when need to test the wireless link quality or engineering installation and debugging.\u003cbr\u003e Use relay settings or connect to Booster Antenna to further the communication distance. Relay once or many times to achieve the\u003cbr\u003e required distance.\u003cbr\u003e Multi-usage, can be set up to receive mode or send mode, use very friendly\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eProduct parameter\u003cbr\u003eInput voltage DC5V-DC24V\u003cbr\u003eInput\/output signal DMX512\u003cbr\u003eWorking frequency channel 2.4GHz ISM 64 channels\u003cbr\u003eMaximum transmitted power 20dBm\u003cbr\u003eReceiver sensitivity -96dBm\u003cbr\u003eCommunication distance 350m (Exist differences in different conditions, such as the weather \\ environment etc.)\u003cbr\u003eworking temperature -2055\u003cbr\u003eDimension L175W44H30mm\u003cbr\u003ePackage Size L178W48H33mm\u003cbr\u003eWeight (G.W) 110g\u003c\/p\u003e\nStock Items Are Same Day Shipped From Knoxville, Tennesse, United States.\n\u003cp\u003eBulk Pricing Available on Request\u003c\/p\u003e","published_at":"2017-08-16T15:52:35-04:00","created_at":"2017-08-16T15:52:35-04:00","vendor":"Wired4Signs USA","type":"LED Control Gear","tags":["DMX","DMX Decoder","Wireless DMX Decoder"],"price":9758,"price_min":9758,"price_max":9758,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41185376781,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEDCT-DMX870S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wireless DMX512 Decoder transceiver 2.4G LT 870","public_title":null,"options":["Default Title"],"price":9758,"weight":150,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"662225894460"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1087\/0018\/products\/8JpLgf8dS6CgRnm4I6RV_LEDCT-DMX870.jpg?v=1571243598"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/0018\/products\/8JpLgf8dS6CgRnm4I6RV_LEDCT-DMX870.jpg?v=1571243598","options":["DEFAULT"],"content":"\u003cp\u003eThe LT- 870 Wireless transceiver can transmit and receive DMX signal. If you are transmitting to low voltage LED Strip or LED modules you can use the LT-870 together with the \u003cstrong\u003e\u003ca href=\"https:\/\/www.wired4signsusa.com\/products\/dmx-receiver-874?variant=41185278029\" target=\"_blank\" title=\"dmx wireless controller\" rel=\"noopener noreferrer\"\u003eLT-874 Wireless DMX Decoder\u003c\/a\u003e\u003c\/strong\u003e( see below)\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eBrief introduction\u003cbr\u003eLT-870 Wireless DMX512 transceiver transfers the standard DMX512 protocol data by wireless transmission. One send, one receive or multiple receive. (Supporting point to point, point to multi-point), a sending end can configure multiple receiving ends as long as the receiving end and sending end are set as same frequency point.\u003cbr\u003e\u003cbr\u003eThe product is used for DMX console and lamp. The wireless data transmission between lamps replaces cable transmission which relies on twisted-pair, etc., for a long time. No delay and data is real-time and reliable during data transmission process,\u003cbr\u003e\u003cbr\u003eThe product adopts 2.4GHZ RF global open ISM frequency channel, which is a low-cost, powerful wireless DMX512 transceiver and widely applied to DMX512 controllers from various manufacturers.\u003cbr\u003e\u003cbr\u003e64 channels choices, users can use 64 groups wireless network independently without interference in one place.\u003cbr\u003e\u003cbr\u003eUse relay Settings if need further increase the communication distance. \u003cbr\u003e \u003cbr\u003e\u003cbr\u003eNote: This product also can be applied to the RS485 bus equipment where wiring is not convenient to wireless transmit RS485 signal.\u003cbr\u003ePerformance Features\u003cbr\u003e Adopt 2.4GHZ RF global open ISM frequency channel, which is applicable for license free worldwide and efficient GFSK modulation. .\u003cbr\u003e Compatible with Standard International standard DMX512 protocol.\u003cbr\u003e A sending end can configure multiple receiving ends. As long as the receiving end and sending end are set as same frequency point, both sides can communicate normally.\u003cbr\u003e 64 channels choices, users can use 64 groups wireless network independently without interference in one place.\u003cbr\u003e 4 choices of sending end transmitted power level, visual communication distance can reach 350 meters at maximum transmitted power (20dBm),\u003cbr\u003e With self-test inspection mode when need to test the wireless link quality or engineering installation and debugging.\u003cbr\u003e Use relay settings or connect to Booster Antenna to further the communication distance. Relay once or many times to achieve the\u003cbr\u003e required distance.\u003cbr\u003e Multi-usage, can be set up to receive mode or send mode, use very friendly\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eProduct parameter\u003cbr\u003eInput voltage DC5V-DC24V\u003cbr\u003eInput\/output signal DMX512\u003cbr\u003eWorking frequency channel 2.4GHz ISM 64 channels\u003cbr\u003eMaximum transmitted power 20dBm\u003cbr\u003eReceiver sensitivity -96dBm\u003cbr\u003eCommunication distance 350m (Exist differences in different conditions, such as the weather \\ environment etc.)\u003cbr\u003eworking temperature -2055\u003cbr\u003eDimension L175W44H30mm\u003cbr\u003ePackage Size L178W48H33mm\u003cbr\u003eWeight (G.W) 110g\u003c\/p\u003e\nStock Items Are Same Day Shipped From Knoxville, Tennesse, United States.\n\u003cp\u003eBulk Pricing Available on Request\u003c\/p\u003e"}

Wireless DMX512 Decoder transceiver 2.4G LT 870

Product Description

The LT- 870 Wireless transceiver can transmit and receive DMX signal. If you are transmitting to low voltage LED Strip or LED modules you can use the LT-870 together with the LT-874 Wireless DMX Decoder( see below)

Brief introduction
LT-870 Wireless DMX512 transceiver transfers the standard DMX512 protocol data by wireless transmission. One send, one receive or multiple receive. (Supporting point to point, point to multi-point), a sending end can configure multiple receiving ends as long as the receiving end and sending end are set as same frequency point.

The product is used for DMX console and lamp. The wireless data transmission between lamps replaces cable transmission which relies on twisted-pair, etc., for a long time. No delay and data is real-time and reliable during data transmission process,

The product adopts 2.4GHZ RF global open ISM frequency channel, which is a low-cost, powerful wireless DMX512 transceiver and widely applied to DMX512 controllers from various manufacturers.

64 channels choices, users can use 64 groups wireless network independently without interference in one place.

Use relay Settings if need further increase the communication distance.


Note: This product also can be applied to the RS485 bus equipment where wiring is not convenient to wireless transmit RS485 signal.
Performance Features
Adopt 2.4GHZ RF global open ISM frequency channel, which is applicable for license free worldwide and efficient GFSK modulation. .
Compatible with Standard International standard DMX512 protocol.
A sending end can configure multiple receiving ends. As long as the receiving end and sending end are set as same frequency point, both sides can communicate normally.
64 channels choices, users can use 64 groups wireless network independently without interference in one place.
4 choices of sending end transmitted power level, visual communication distance can reach 350 meters at maximum transmitted power (20dBm),
With self-test inspection mode when need to test the wireless link quality or engineering installation and debugging.
Use relay settings or connect to Booster Antenna to further the communication distance. Relay once or many times to achieve the
required distance.
Multi-usage, can be set up to receive mode or send mode, use very friendly


Product parameter
Input voltage DC5V-DC24V
Input/output signal DMX512
Working frequency channel 2.4GHz ISM 64 channels
Maximum transmitted power 20dBm
Receiver sensitivity -96dBm
Communication distance 350m (Exist differences in different conditions, such as the weather \ environment etc.)
working temperature -2055
Dimension L175W44H30mm
Package Size L178W48H33mm
Weight (G.W) 110g

Stock Items Are Same Day Shipped From Knoxville, Tennesse, United States.

Bulk Pricing Available on Request

Maximum quantity available reached.

Works Together With The Following Receiver Decoder