Constant Current LED Drivers | Wired4Signs

WIRED4SIGNS USA • FREE shipping on orders over $349 T&C apply

Constant Current LED Drivers

(2 products)

Constant current LED drivers hold a fixed output current, such as 350mA or 700mA, while the voltage adjusts to the LED load. They power LED modules, high-power LEDs and sign components rated by current rather than voltage. Each constant current driver lists an output voltage window, so match it to the combined forward voltage of the LEDs on that circuit.

View as

  • Live chat

    Get answers fast

  • Rated 4.8/5

    By 1,500+ reviews

  • Free shipping

    On orders over $349

Shop Constant Current LED Drivers for LED Modules and Fixtures

Constant Current Drivers for LED Modules, Signs and Fixtures

Use a constant current driver when the LED load is specified in milliamps instead of volts. Single-output drivers in this range deliver 350mA or 700mA, with output windows from as low as 3V up to 100V depending on the model. Compact low-power units handle a few watts for small fixtures and accent lights. Larger units in fully isolated Class 2 housings run longer strings of modules for signs and architectural fixtures. All accept 120V AC supply, and both also run on 240V AC.

Constant Current vs Constant Voltage LED Drivers

A constant voltage LED driver holds a fixed 12V or 24V output and suits LED strip, which has current-limiting resistors built in. A constant current driver fixes the current instead and lets the voltage float within its rated window. Connect too many LEDs and the required voltage exceeds the window. Connect too few and it drops below the minimum. Add up the forward voltage of each LED in series, then pick a driver whose window covers that total at your LEDs' rated current.

Shop similar collections: Dimmable LED Drivers | 12V DC Power Supplies | 24V DC Power Supplies | LED Dimmers and Controllers | DMX Controllers

Why Buy Constant Current LED Drivers from Wired4Signs

Our team works with constant current LED systems every day, from signage modules to architectural fixtures, and can check a driver against your LED forward voltage and current before you order. In-stock drivers ship the same day from Tennessee. When a project needs more than an off-the-shelf driver, our micro-factory can assemble plug-and-play fixtures to your specifications. Free shipping on orders over $349, with easy returns subject to conditions.

Frequently Asked Questions

What is a constant current LED driver?

It is a driver that holds a fixed output current, such as 350mA or 700mA, and varies its voltage within a rated window to suit the connected LEDs. Use one for LEDs and modules rated in milliamps.

Can I use a constant current driver with LED strip?

Not with standard 12V or 24V LED strip. That strip is designed for a constant voltage LED driver at its rated voltage. Use a constant current driver only for LEDs or modules specified in milliamps.

What output voltage range do I need?

Add the forward voltage of every LED wired in series on the circuit. The total must fall inside the driver's output window, for example 9-24V or 28-100V, at the driver's rated current.

Are these constant current drivers rated for outdoor use?

It depends on the model. Ratings on this page range from IP42 housings for indoor or protected locations to IP66 for wet locations. Check the IP rating on each product before installing outdoors.