Hardwired LED Drivers for LED Strip & Fixtures | Wired4Signs

WIRED4SIGNS USA • FREE shipping on orders over $349 T&C apply

Hardwired LED Drivers

(45 products)

Hardwired LED drivers connect directly to 120V or 240V AC line voltage and convert it to the low-voltage DC that LED strip and fixtures need. This range covers 5V, 12V, 24V and 48V constant voltage outputs, plus constant current options. Choose commercial LED drivers by enclosure, from slim Class 2 units and junction-box drivers to IP67 waterproof housings for outdoor work.

View as

  • Live chat

    Get answers fast

  • Rated 4.8/5

    By 1,500+ reviews

  • Free shipping

    On orders over $349

Shop Hardwired LED Drivers for LED Strip, Fixtures and Signs

Hardwired Commercial LED Drivers by Enclosure and Location

Slim Class 2 drivers fit inside cabinets, coves and ceiling voids where space is tight. Junction-box drivers mount directly to a standard electrical box, which keeps line-voltage connections enclosed. Enclosed metal-case and DIN-rail power supplies suit sign cabinets, control panels and equipment rooms. Waterproof drivers rated IP67 handle outdoor signs, landscape runs and wet locations. Leave headroom between the LED load and the driver's rated wattage rather than running a driver at full capacity. Confirm each driver's input voltage range matches the building supply before you order.

Dimmable vs Non-Dimmable Hardwired LED Drivers

Non-dimmable drivers switch on and off with the circuit. Dimmable drivers fall into a few groups, and the dimmer on the job decides which one fits. AC phase-dimmable drivers work with compatible forward-phase or reverse-phase wall dimmers on the line side. 0-10V drivers take a separate low-voltage signal from a 0-10V dimmer or control system. Multi-protocol drivers accept several dimming methods in one unit. Wall-switch drivers combine the driver and dimmer in one wall-box device. Check the dimmer compatibility notes on each product page before you buy.

Shop similar collections: Dimmable LED Drivers | 12V DC Power Supplies | 24V DC Power Supplies | Plug-In LED Strip Adaptors | LED Dimmers and Controllers

Why Buy Hardwired LED Drivers from Wired4Signs

We stock hardwired drivers from Mean Well, EnoLED, Magnitude, ERP Power and Tridonic, so you can match a driver to the strip, enclosure and dimmer on the job. Our team checks wattage, voltage and dimming compatibility on request, and in-stock drivers ship the same day from Tennessee. For complete systems, our micro-factory can assemble plug-and-play fixtures with the driver, strip and channel matched. Free shipping on orders over $349, with easy returns subject to conditions.

Frequently Asked Questions

What is a hardwired LED driver?

It is a driver wired directly to the building's AC supply, usually 120V or 240V, instead of plugging into an outlet. It converts line voltage to the DC output the LEDs need. Install it to local electrical code.

What voltage LED driver do I need?

Match the driver's output voltage to the LED strip or fixture, typically 12V or 24V. 5V and 48V outputs are also stocked for specialty strip and long runs. Then choose a wattage above the total load.

Can I dim a hardwired LED driver with my existing wall dimmer?

Only if the driver is AC phase dimmable and the dimmer is compatible with it. Standard drivers will not dim, and 0-10V drivers need a 0-10V dimmer instead.

Which hardwired LED drivers can go outdoors?

Choose a driver rated IP67 for outdoor or wet locations. Indoor Class 2 and enclosed drivers need a dry, ventilated location.