Free shipping on orders over $350 T&C apply

Signage Standoffs & Letter Fixings

(42 products)
Learn more about Signage Standoffs & Letter Fixings Go to
View as
Back to top Go to

All of our Signage Standoffs & Letter Fixings

Standoff wall mounts are an ideal way to mount signs, artwork, or other flat surfaces in a clean and professional manner. By using wall standoff mounts, you can create a floating effect that is both eye-catching and stylish. You can order a variety of textures and finishes, from glossy to matte and more, to customize your look. We here at Wired4Signs USA work together with some of the top stand-off hardware manufacturers to offer you quality signange standoffs for sale, manufactured here in the USA or in the UK.

What is an Aluminum Signage Standoff?

Acrylic panel stand-offs, also known as standoff screws, can be used for letter fixing, acrylic lobby signs, photography, artwork, and many other mounting solutions that are both functional and decorative. Signage and letter spacers secure the panels to the wall, leaving about a 1-inch space between them, creating a clean and attractive finish.

Signage standoff system options

In contrast to other sign mounting methods, the use of sign standoffs enables the sign panel to stand out from the wall and draw attention to it. Here are the some of the standoffs systems we carry:

Hidden / Concealed Snapfix Clip-in Letter Standoffs for Signs

We offer Snapfix hidden clip-in acrylic standoffs for signs. The best way to install letter signage is with the Snapfix Large clip-in letter standoffs. These pin-mounted signage fixtures are ideal to mount letter panels with invisible standoffs and are available in a variety of 10 colors and 3 sizes. Quick snap standoffs are manufactured in the UK to ensure a high-quality product. You can attached these hidden signage clips with methacrylate epoxy adhesive or with screws, depending on your application and materials.

Hidden Z-Clip Cleat Mounts for Heavy Signs

French cleats are the solution for mounting heavy signs or large panels without visible mounting hardware. These Z-Clips work as a pair and securely hook together to support your sign flush against the mounting surface. Z-Clip cleats allow you to securely mount an LED sign in a way that can be easily removed for servicing.

Aluminum Signage Standoff Kits for Through-Hole Mounting by Gyford Standoff Systems

A cost-effective American-made mounting solution for signage. These signage standoffs without lights are perfect for stud-mounted acrylic letter projects. Sign fasteners, screws, and all other accessories are included in the kit. They are stocked in raw aluminum finish, matte silver anodized, black anodized and brass anodized, and are available diameters from 3/8" through to 1-1/2" and standoff heights ranging from 1/2" through to 2" high.

LED Edge-Lit Signage Standoff Kits by Gyford Standoff Systems

This American-made 1" diameter standoff kit includes all the mounting hardware you need plus LEDs and a suitable power supply. They are specifically designed to hold side-firing LED chips which, when powered, illuminate the pattern etched into your transparent signage panel. These edge-lit standoffs are designed for a maximum signage panel thickness of 1/2" and are ideal for acrylic letters stud mounted with LED edge-lighting. LED edge-lit standoff kits come in the following variations:

Edge Grip Signage Standoff Kits by Gyford Standoff Systems

These standoffs hold your sign securely and without needing to drill holes in the panel, which makes them ideal for artwork or photography exhibitions. They're also great for changing signage frequently, such as name boards and business indexes. These plaque mounting hardware kits are available as a single-sign pack of 4 standoffs and they are available in 3/4", 1" and 1-1/4" barrel diameters, and in raw aluminum, matte silver anodized, and matte black anodized finished.

Flush Mirror Mounting Clip Kits by Gyford Standoff Systems

Mirror mounting kits are similar to edge-grip standoffs but instead of fixing the panel proud of the mounting surface, these clips mount the signage panel flush against the wall. These panel clips are most commonly used for mounting mirror panels to a wall, but can also be used for flush mounting any signage panel without drilling the panel.

Flush Mount Through-Hole Signage Standoff Kits by Gyford Standoff Systems

Gyford Flush Mount Signage Standoff Kits are manufactured in the USA. If you're looking for a way to secure a sign flush stud mount against another surface, then flush mount signage kits are the perfect solution. You can use flush mount standoffs to fasten signs, artwork, blackboards or whiteboards to a mounting surface. These flush mount studs are available in 3/8", 1/2", 5/8", 3/4" and 1" cap diameters, and are offered in raw aluminum, matte silver anodized, black anodized and brass anodized.

Free-Standing Desk Sign Kits by Gyford Standoff Systems

This through-hole stand kit is perfect for turning smaller acrylic signage panels into free-standing desktop signage. Each American manufactured kit comes with everything you need to install your signage, excluding the acrylic panel itself.

What makes our signage products and service stand out from the rest?

  • The aluminum signage standoff kits we provide are American-made or Made in the UK.
  • We carry the best quality Signage Standoff kits for sale in the USA.
  • We provide contractor bulk packs of 100 standoffs of some models - everything you need for 25 signs or panels.
  • Best customer service - Chat with one of our lighting experts in the bottom right corner of the screen for a quick expert consultation.
  • We can assemble custom acrylic signage panels for you - contact us for more information.
  • Call us at (865) 339-4956 if you need extra assistance; we are ready to help.

Frequently asked questions

Q: What are standoffs used for?

A: Sign standoffs, also known as standoff screws, are hardware components used for mounting signs. Standoffs help signage panels stand out by having a ~1-inch gap between the wall and the signage.

Q: How do I use standoff screws?

A: A standoff system typically includes a barrel, anchor, cap, and sign standoff screws. The anchor is used to mount the standoff to the surface. The standoff barrel is what spaces the panel from the wall. Then, the sign standoff screw is used to sandwich the panel with the cap, which is the decorative finish to the installation.

Q: What color do you have available for the Gyford standoffs?

A: Bright aluminum, Matte Silver, Matte Black, and Matte Gold.

Q: Why are Gyford standoff systems made of aluminum?

A: One of the best reasons to use aluminum in your designs is its corrosion resistance. Additionally, aluminum can undergo an anodizing process, which has several advantages over painting in that it prevents the color from flaking or peeling and is much more resistant to fading

Q: How much weight can a standoff hardware hold?

A: Standoff mounts can hold considerable weight, depending on their size. The weight they can hold depends on the type and size of standoff you use. For acrylic panels longer than 4 feet, it is advised that you add additional standoffs every 10 to 18 inches.

Common search terms: how to install stud-mounted letters, how to attach wood letters to wood, how to hang letters on a wall without nails, how to hang metal letters on wall, stand-off signs, stand-off letters, stand-off wall brackets

Back to top