How to join LED profiles | W4S Wiki

WIRED4SIGNS USA • FREE shipping on orders over $349 T&C apply

How to join LED profiles

Long runs, corners, and shapes all need LED profiles joined together. A good joint keeps the run straight, lines up the diffuser, and keeps the seam neat. These are the options we stock and when to use each.

Profile connectors

These are joining plates or linear connectors that hold both pieces of profile together. Some also function as mounting clips.

When a run is longer than one length of profile, you can join two lengths end to end with straight connectors. For corners, you can use angled connectors.

Connectors are made for specific profiles or families, so use the one made for yours. You can find them in the accessories on the profile's product page. 

Some examples:

A straight Q9 linear connector for LED profiles. A flat, rectangular aluminum bracket with four screw holes for grub screws. Four grub screws are alongside.
A 120-degree Q9 linear connector for LED profiles. A flat, angled aluminum bracket with four screw holes for grub screws. Four grub screws are alongside.

Ready-made corner joints

For corners, we offer ready-made corner joint pieces for many of our profiles. These are short corner sections of the profile, so you get neat, accurate corners without miter cutting. Depending on the profile, they come in angles such as 60°, 90°, 120°, and 135°, plus 90° and 270° perpendicular connectors. For profiles we offer these for, you can find them in the accessories on the profile's product page. We can also manufacture custom pieces for you.

An example:

A pre-made 90-degree corner joint for the Corner14 LED channel.

 

Joints for round and tube profiles

Round and tube profiles use their own joints: straight joints, elbows, tees, and cross joints, some in clear or translucent versions. For profiles we offer these for, you can find them in the accessories on the profile's product page.

An example:

A translucent cross joint for 1.50 round profiles, featuring four openings for inserting round profiles and three brass grub screws to secure them.

Custom miter cutting

If there's no ready-made joint for your profile or angle, we can cut your profiles to length with custom miter angles. Note your specifications in the order notes when you check out. We don't offer refunds or replacements for profiles and covers that have been cut, so double-check your measurements and allow for end caps. To cut them yourself, see How to cut LED profiles and covers.

Connecting the LED strip across a joint

A profile joint only joins the profile itself. LED strip can run across straight profile joints without needing a joint or connection itself. For most corners, you will likely need to join the LED strip, as standard LED strips cannot bend around corners. You can solder it, or use a solderless corner connector made for your strip if one is available; see How to solder LED strips for soldering instructions. We can also solder your strips for you; simply contact us with your needs.